I Could be Fun Doing a Custom Car Audio Installation on Your Own

While thinking about custom car audio installation, you might be tempted to think that only professionals can do it. There is nothing further from the truth and you need to know that with the right tools and instructions you can install your own custom car audio. Instructions can be found in your local car audio store or on their web sites. The first thing you therefore need to do is to get the relevant information for your custom car audio. Visit sites that seem to know what they are talking about. What you are looking for is a clear and concise format of the steps to take while installing, conveyed in the most simple way. There are complicated manuals out there that will leave you more confused. Confusion is the last thing you need while embarking on the vital process.

Firstly, when installing custom car audio amplifiers, you need to be extra careful and if there are diagrams to guide you, they will certainly make your work easier. The wiring is especially very tricky and you need to take your time. Speakers need to be installed in the right locations as well as capacitors. All these aspects make up the car stereo system and everything needs to be just the right fit for your car. This may prove to be a very technical job and if you feel frustrated, call in someone who has been trained. In the U.S, they actually have special schools to train people on custom car audio installation. One example of such a training facility is The Syntec Technical School and Mobile Dynamics.

Among the key steps you should be aware of while installing a custom car audio amplifier are that drilled holes should be protected from rust by paint, install a fuse holder for the power wire, that will be as close as possible to the battery terminal connection. This will ensure that in case of a power wiring short, your car will be protected from burning up. Finally, you must reconnect the negative battery terminal. There are so many other steps to follow and your accuracy will make sure that you get the installation right. You can purchase your own DVD instruction package for you to study at home. One thing you need to be aware of while installing power capacitors is that they charge very quickly while storing a lot of energy.

Custom car audio installation is not simple and when you are thinking of getting someone to do the job for you, you need to consider a few things. Firstly, they must be from a reputable company. Their training credentials must be reflected in the way they conduct their work. Experience in the job will make you more confident in their ability to install your custom car audio. If they are graduates from recognized institutions, they most probably can do the job well. Above all that, be prepared to part with some service charge. Some charges are too extravagant and you need to find a person or company that can install your audio in the most fair way. You can avoid these costs altogether by taking more time to master the installation process by yourself and you can invent a new hobby because it is fun.

About Author

Muna Wa Wanjiru is a web administrator, For more information on Custom Car Audio Installation, visit his site at CUSTOM CAR AUDIO INSTALLATIONI Will Highly Appreciate Your Views About Custom Car Audio Installation On My Blog Here

Article Source: ArticlesBase.com – I Could be Fun Doing a Custom Car Audio Installation on Your Own

Tags: , , , , , ,

categories car accessories | admin November 29, 2009

12 Comments to “I Could be Fun Doing a Custom Car Audio Installation on Your Own”

  1. By jonmanch3st3r, November 14, 2009 @ 5:18 am

    got enuff snow?? holy shit man hope that vans all wheel drive

  2. By badalo13, November 14, 2009 @ 5:22 am

    3:15 was that a grinder??? ROFLMAO

  3. By DisaR.., November 14, 2009 @ 6:17 am

    http://www.caraudiobook.com/become_car_audio_installer/become_car_audio_installer.htm

  4. By Danny M, November 14, 2009 @ 6:39 am

    You can use this website:
    http://the12volt.com/

    It's been very helpful to me. You can find a lot of information in the forums plus they have a listing of books you can buy. I had heard that ELAC ( East L.A. City College) had a course. I know for a fact that West Valley Occupational had one.

    You can also check this site for upcoming events:
    http://www.merausa.org/Events/Workshops/mera_cea_regional_workshops.asp

  5. By chika9008, November 14, 2009 @ 7:41 am

    throw him 50 bucks…if he gripes…tell him you could have gotten free installation at ABC warehouse (had you bought the unit there)…..and these days…everyone is an expert….get him a hooker and a six pak….lol

  6. By MandoMadnessCarAudio, November 14, 2009 @ 6:44 pm

    Your paying for someone to do it the right way, and have it problem free. It would take up to a half hour not 5 minutes.

    and if your paying 200 your getting ass raped .

    1. You need a dash kit for the double din stereo to sit flush

    2. a wire connector to adapt to you stock harness. OR cut the wires and splice into the harness.

    3. May need an antenna adapter. May not.

  7. By Erik S, November 15, 2009 @ 4:35 pm

    I'd charge $100 or so for that. Regardless, stay away from Circuit City, Best Buy, etc, as they take shortcuts when doing the jobs, and don't always do it right. If you are going to get it done professionally, find a local shop, or maybe even Tweeter.

  8. By Bassman, November 15, 2009 @ 5:11 pm

    im a professional installer, i dont know where you got it installed, but wires under carpet, vaccumm floors where we worked, setting all radio settings (your old presets, clock, eq). if there is no case for the cd, then i dont put it in a case, if there is one sitting there i put it away, not all installers will, its not really a policy i dont think, just courtesy. subs dimming lights is not their fault, its from your car being weak and your system being good. unless you wanteda cap or something they did all they could. blown fuse on first day is likely going to happen if you cranked the volume trying to draw too much current through the power wire. I've never fastened a box to the car unless it was paid for as an extra and asked for specifically.

  9. By khan, November 15, 2009 @ 7:10 pm

    circuit city will install your sub and amp for 60.99, you have to purchase the sub, amp, and wires separately..the sub can range anywhere from $40 to a few hundred dollars depending on brand and size. Same goes for an amp. A wiring kit for your amp usually costs around 70 bucks. Speaker wire is usually around .80 per foot. I just got 2 12" subs an amp and all the wiring installed. To install everything it was about 80 bucks. The subs, amp and wiring was around 750.

  10. By trooper210, November 16, 2009 @ 7:14 am

    do a search on MECP buy the course the basic and study it later you can go to your local library to take the test
    good luck

  11. By mcr80221, November 17, 2009 @ 12:50 pm

    Best buy, Circut City they maybe able to help or go to mecp.com

  12. By breybear01, November 17, 2009 @ 3:52 pm

    subs? amp? speakers? speaker amp?
    what all getting done all of that ? just subs? just speakers
    gimme a list and ill give you a price.